• New

Apex Gel - Make Me Blush (HEMA FREE)

£8.89

Type: Gellifique Apex Gel

CPNP Reg. No: 3142755

Odour: Light

Salon Service: Natural Nail Overlay / Nail Forms / Tips

Watch Demo

Volume: 15ml

Consistency: Thick

Removal: Combi (File & Soak Off)

Quantity
In Stock

 

Tag #gellifique to be featured!

  Delivery with MyHermes (3-5 working days), or with DPD (2-3 working days)

International delivery with DHL (3-7 working days)

  In case of product fault items are subjected to refund within 7 days of receiving your items.

Please refer to our full terms & conditions section for more information.

PRODUCT DESCRIPTION

GellifiQue Apex gel has thick viscosity similar to that of a hard builder gel. This product can be used to create a nail extension using forms of up to 1.2 cm. 

GELLIFIQUE RECOMMENDATIONS

  • Please ensure that you have the necessary training to work with this product
  • We do not recommend using acetone to clean/prep the nails
  • Use a lamp with a low heat mode (99sec) to reduce any discomfort for the client as some are more sensitive to heat spikes than others
  • Use a primer + base coat for better adhesion
  • Use a responsibly purchased (reliable supplier) UV/LED lamp of at least 48W so the gel cures faster

FEATURES

  • non - yellowing formula
  • hard builder gel
  • HEMA FREE
  • comes in various shades
  • light odour
  • free from toxic chemicals

GELLIFIQUE APEX GEL APPLICATION - NATURAL NAIL OVERLAY

STEP #1: NAIL PREP 

  • Sanitise your own and your client's hands
  • Do not use cuticle softening products or warm water 
  • Gently push back the cuticles and "tidy up" the area using a soft buffer or a tool which you have been trained with
  • File the nails into shape using a 100/180 grit nail file
  • Gently buff the natural nail with a soft buffer to remove any shine
  • Cleanse the nails with Isopropyl Alcohol or specialised cleanser
  • Apply the Gellifique acid -free Primer
STEP #2: FIRST LAYER
  • Apply a thin layer of Gellifique Microcrystal or Rubber Base Coat and cure with a responsibly purchased UV/LED lamp of at least 48W for 60 seconds / 120 seconds with UV lamp

STEP #3: SECOND LAYER

  • Apply a medium-size bead of Gellifique Apex Gel spreading it side to side and dragging away from the cuticle area. Please avoid thick build up around the free edge and the cuticle area as this will result in the product lifting later
  • Seal the free edge
  • We recommend curing the Gellifique Apex Gel on a low heat mode (99seconds) to avoid any discomfort for the client as sensitivity to heat spikes varies in people
  • Build and cure one nail at a time, turning the hand upside down to allow the gel to self-level and create an apex if necessary
  • Cure each coat with a responsibly purchased UV/LED lamp of at least 48W for 60 seconds / 120 seconds with UV lamp

STEP #4: THIRD LAYER

  • Please follow the above process one more time until you are happy with your result

STEP #5: REFINE

  • Wipe with Isopropyl Alcohol
  • Shape the nail using a Gellifique 100/180 grit nail file
  • Buff into shape using a Gellifique 120/180 grit buffer and concentrate on reducing the product around the cuticle area and the free edge
  • Remove any remaining dust with a duster brush

STEP#6: TOP COAT

  • Apply a Gellifique Microcrystal Top Coat, Gellifique Rubber Top Coat or Gellifique Velvet Matte Top Coat
  • Cure the top coat of your choice using a responsibly purchased UV/LED lamp of at least 48W for 60 seconds/120seconds with UV lamp
  • No need to wipe or cleanse after curing as all Gellifique top coats are tack free

GELLIFIQUE APEX GEL - REBALANCE

STEP #1: TOP COAT & COLOUR REMOVAL

  • Sanitize your own and your client's hands
  • Using an E-file (if you are E-file trained) or a 100/180 grit file remove the Gellifique top and colour coats in order to expose the Gellifique Hard Builder Gel underneath these products
  • Remove any dust and wipe with Isopropyl Alcohol

STEP #2: NAIL PREP

  • Do not use cuticle softening products or warm water
  • Gently push back the cuticles and "tidy up" the area using a soft buffer or a tool which you have been trained with
  • Ensure that all product which has lifted has been removed using a Gellifique 120/180 grit buffer
  • Reduce the length of the nails if required
  • Ensure that the nail surface is smooth and even
  • Clean the nail with Isopropyl Alcohol
  • Apply acid-free primer or regular primer depending on the client's nail type

STEP #3: APEX GEL APPLICATION

  • We recommend curing the Gellifique Apex Gel on a low heat mode (99seconds) to avoid any discomfort for the client as sensitivity to heat spikes varies in people
  • Apply a thin layer of Gellifique Apex Gel and cure with a responsibly purchased UV/LED lamp of at least 48W for 60 seconds / 120 seconds with UV lamp
  • Apply a medium-size bead of Gellifique Apex Gel spreading it side to side and dragging away from the cuticle area. Please avoid thick build up around the free edge and the cuticle area as this will result in the product lifting later
  • Seal the free edge
  • Build and cure one nail at a time, turning the hand upside down to allow the gel to self-level and create an apex if necessary
  • Cure each coat of gel with a responsibly purchased UV/LED lamp of at least 48W for 60 seconds / 120 seconds with UV only

STEP #4: SHAPE

  • Wipe the nail with pure Isopropyl Alcohol
  • Refine using a Gellifique 100/180 grit file concentrating on reducing product around the cuticle area and free edge to create a smooth surface
  • Gently buff using a Gellifique 120/180 buffer

STEP #6: If you are going to apply gel polish colour please follow the instructions for gel polish colour application

STEP #7: TOP COAT

  • Apply a Gellifique Microcrystal Top Coat, Gellifique Rubber Top Coat or Gellifique Velvet Matte Top Coat
  • Cure the top coat of your choice using a responsibly purchased UV/LED lamp of at least 48W for 60 seconds/120seconds with UV lamp
  • No need to wipe or cleanse after curing as all Gellifique top coats are tack free
GellifiQue
P04Ax - Apex Gel - Make me blush
24 Items

Data sheet

Colour Group
Pink #f384ab
Viscosity
High
Consistency
Thick
Ingredients
Acrylates Copolymer, Isopropyl Titanium Triisostearate, Trimethylolpropane Triacrylate,Dimethylsiloxane, Microcrystalline Wax, D&C Red No.30, Iron Hydroxide Oxide Yellow, D&C Red no.34

Specific References

You might also like