ADVANCE SCULPTING GEL - AMOUR

£24.00
(£20 ex VAT)
or 6 weekly interest-free payments from £4.00 GBP with Laybuy what's this?

TYPE: UV/LED Hard Sculpting Gel
UKCP Reg. No: 70429711
SDS/MSDS FILE
ODOUR: Low to None
SALON SERVICE: Nail Enhancement
APPLICATION: Nail Extension 
VOLUME: 50 gr
CONSISTENCY: Thick / Mousse texture
REMOVAL: File Off
DELIVERY: 3-5 working days worldwide

Quantity
In Stock

 

Tag #gellifique to be featured!

PRODUCT DESCRIPTION

Meet Gellifique® Advance SCULPTING gel -  an innovation in the nail industry in the form of a HEMA FREE UV/LED Thixotropic hard builder gel.

This odour free, builder gel has a thick, souffle-like texture that allows you to sculpt four fingernails at a time.

Its minimal ultra-hard gel properties are perfect for sculpting all lengths and shapes of nail enhancements. 

Due to its unique formulation, the product stays put exactly where you place it and will not run into the cuticles or vertical folds of the nail plate.

Use the Gellifique® Advance SCULPTING Gel to create a perfect reverse french nail bed and team it up with the Advance BUILDER Gel in Arctic Frost white to create a flawless french manicure.

Our tip: create the nail skeleton/shape/form using nail forms for those perfect lines and angles without the bulk. Then, file away any roughness and apply a thin coat of the matching shade in the Advance BUILDER Gel to create a flawless and super hard nail enhancement.

FEATURES

  • sculpt 4 fingers at a time
  • minimum self-levelling properties
  • non - yellowing
  • a true hard gel in a HEMA FREE formula
  • thorough cure in 60 seconds with LED / 120 sec in UV 
  • resilient 
  • light to no odour
  • 3+ weeks wear

GELLIFIQUER® FORMULA

Our signature 100% gel line is formulated to deliver superior colour depth and coverage as well as long-lasting wear of 3+ weeks on NATURAL NAILS. Better yet, our products provide peace of mind in their unique HEMA FREE formulation aimed at reducing skin sensitivities. 
Protect yourself, your salon, and your clients from developing dermal allergies to acrylates by using a responsibly manufactured gel system. 

! Please always use the complete Gellifique® system and follow our application guidelines. 

! As with all thicker based gel products we recommend a low heat mode to be used during curing for the maximum comfort of your client.

GELLIFIQUE® RECOMMENDATIONS

  • Please ensure that you have the necessary training to work with this product
  • Please always wear gloves to protect your hands when working with the product.
  • We do not recommend using acetone to clean/prep the nails
  • Use a lamp with a low heat mode (99sec) to reduce any discomfort for the client as some are more sensitive to heat spikes than others
  • Use a bonder + base coat for better adhesion
  • Use a responsibly purchased (reliable supplier) UV/LED lamp of at least 48W so the gel cures faster

ADVANCE SCULPTING GEL APPLICATION - NATURAL NAIL OVERLAY

STEP #1: NAIL PREP 

  • Sanitise your own and your client's hands
  • Do not use cuticle softening products or warm water 
  • Gently push back the cuticles and "tidy up" the area using a soft buffer or a tool which you have been trained with
  • File the nails into shape using a 100/180 grit nail file
  • Gently buff the natural nail with a soft buffer to remove any shine
  • Cleanse the nails with Isopropyl Alcohol or specialised cleanser
  • Apply the Gellifique acid -free Bonder

STEP #2: FIRST LAYER

  • Apply a thin layer of Gellifique Microcrystal Base Coat or Rubber Base Coat in medium texture and cure with a responsibly purchased UV/LED lamp of at least 48W for 60 seconds / 120 seconds with UV lamp. 

STEP #3: SECOND LAYER

  • Apply a medium-size bead of Gellifique ADVANCE SCULPTING GEL spreading it side to side and dragging away from the cuticle area. Please avoid thick build up around the free edge and the cuticle area as this will result in the product lifting later
  • Seal the free edge
  • We recommend curing the Gellifique Hard Builder Gel on a low heat mode (99seconds) to avoid any discomfort for the client as sensitivity to heat spikes varies in people
  • Build and cure one nail at a time, turning the hand upside down to allow the gel to self-level and create an apex if necessary
  • Cure each coat with a responsibly purchased UV/LED lamp of at least 48W for 60 seconds / 120 seconds with UV lamp

STEP #4: THIRD LAYER

  • Please follow the above process one more time until you are happy with your result

STEP #5: REFINE

  • Wipe with Isopropyl Alcohol
  • Shape the nail using a Gellifique 100/180 grit nail file
  • Buff into shape using a Gellifique 120/180 grit buffer and concentrate on reducing the product around the cuticle area and the free edge
  • Remove any remaining dust with a duster brush

STEP#6: TOP COAT

  • Apply a Gellifique Microcrystal Top Coat, Gellifique Rubber Top Coat or Gellifique Velvet Matte Top Coat
  • Cure the top coat of your choice using a responsibly purchased UV/LED lamp of at least 48W for 60 seconds/120seconds with UV lamp
  • No need to wipe or cleanse after curing as all Gellifique top coats are tack free

 ADVANCE SCULPTING GEL - REBALANCE

STEP #1: TOP COAT & COLOUR REMOVAL

  • Sanitize your own and your client's hands
  • Using an E-file (if you are E-file trained) or a 100/180 grit file remove the Gellifique top and colour coats in order to expose the Gellifique Hard Builder Gel underneath these products
  • Remove any dust and wipe with Isopropyl Alcohol

STEP #2: NAIL PREP

  • Do not use cuticle softening products or warm water
  • Gently push back the cuticles and "tidy up" the area using a soft buffer or a tool which you have been trained with
  • Ensure that all product which has lifted has been removed using a Gellifique 120/180 grit buffer
  • Reduce the length of the nails if required
  • Ensure that the nail surface is smooth and even
  • Clean the nail with Isopropyl Alcohol
  • Apply acid-free primer or regular primer depending on the client's nail type

STEP #3: HARD BUILDER GEL APPLICATION

  • We recommend curing the Gellifique ADVANCE SCULPTING GEL on a low heat mode (99seconds) to avoid any discomfort for the client as sensitivity to heat spikes varies in people
  • Apply a thin layer of Gellifique Hard Builder Gel and cure with a responsibly purchased UV/LED lamp of at least 48W for 60 seconds / 120 seconds with UV lamp
  • Apply a medium-size bead of Gellifique Hard Builder Gel spreading it side to side and dragging away from the cuticle area. Please avoid thick build up around the free edge and the cuticle area as this will result in the product lifting later
  • Seal the free edge
  • Build and cure one nail at a time, turning the hand upside down to allow the gel to self-level and create an apex if necessary
  • Cure each coat of gel with a responsibly purchased UV/LED lamp of at least 48W for 60 seconds / 120 seconds with UV only

STEP #4: SHAPE

  • Wipe the nail with pure Isopropyl Alcohol
  • Refine using a Gellifique 100/180 grit file concentrating on reducing product around the cuticle area and free edge to create a smooth surface
  • Gently buff using a Gellifique 120/180 buffer

STEP #6: If you are going to apply gel polish colour please follow the instructions for gel polish colour  application

STEP #7: TOP COAT

  • Apply a Gellifique Microcrystal Top Coat, Gellifique Rubber Top Coat or Gellifique Velvet Matte Top Coat
  • Cure the top coat of your choice using a responsibly purchased UV/LED lamp of at least 48W for 60 seconds/120seconds with UV lamp
  • No need to wipe or cleanse after curing as all Gellifique top coats are tack free
ASG07 - Amour
54 Items

Data sheet

Density
Opaque
Viscosity
Low
Consistency
Thick
Ingredients
Acrylates Copolymer, Isopropyl Titanium Triisostearate, Dimethicone, Microcrystalline Wax, Cellulose Acetate Butyrate, Bismuth Chloride Oxide, Pigments+
UKCP Reg. No
70429711
Professional use only
Yes
Available in Spain
No

Specific References

EAN13: 5060726307635

You might also like

chat Comments (0)
It looks like you are visiting us from United States. Do you want to go to our European website?