Our Dimond Sculpting Gel in Clear was formulated with an advanced nail technician in mind. Its ultra-clear formulation allows for creative glass-like designs and with its unparalleled strength, it allows the nail technician to create extra-long, tightly pinched designs/shapes with ease. Made in Europe with premium-grade ingredients guaranteed for long and durable wear.
Unlike our other gels, this gel has a unique workability feature whereby it allows the nail technician to have greater control and easily equalise the surface while keeping the shape, therefore minimising filling time. It has a medium to thick texture and self-levelling properties. As with our other Premium Builder gels, our Dimond Clear Builder Gel files beautifully without compromising strength and structure.
Shapes and files beautifully
None yellowing
Crystal clear
Medium to thick texture
Suitable for modelling long shapes
Scratch proof
GELLIFIQUE RECOMMENDATIONS
Please ensure that you have the necessary training to work with this product
We do not recommend using acetone to clean/prep the nails
Use a lamp with a low heat mode (99sec) to reduce any discomfort for the client as some are more sensitive to heat spikes than others
Use a primer + base coat for better adhesion
Use a responsibly purchased (reliable supplier) UV/LED lamp of at least 48W so the gel cures faster
GELLIFIQUE BUILDER GEL APPLICATION - NATURAL NAIL OVERLAY
STEP #1: NAIL PREP
Sanitise your own and your client's hands
Do not use cuticle softening products or warm water
Gently push back the cuticles and "tidy up" the area using a soft buffer or a tool which you have been trained with
File the nails into shape using a 100/180 grit nail file
Gently buff the natural nail with a soft buffer to remove any shine
Cleanse the nails with Isopropyl Alcohol or specialised cleanser
Apply the Gellifique acid -free Primer
STEP #2: FIRST LAYER
Apply a thin layer of Gellifique Microcrystal or Rubber Base Coat and cure with a responsibly purchased UV/LED lamp of at least 48W for 60 seconds / 120 seconds with UV lamp
STEP #3: SECOND LAYER
Apply a medium-size bead of Gellifique Hard Builder Gel spreading it side to side and dragging away from the cuticle area. Please avoid thick build up around the free edge and the cuticle area as this will result in the product lifting later
Seal the free edge
We recommend curing the Gellifique Hard Builder Gel on a low heat mode (99seconds) to avoid any discomfort for the client as sensitivity to heat spikes varies in people
Build and cure one nail at a time, turning the hand upside down to allow the gel to self-level and create an apex if necessary
Cure each coat with a responsibly purchased UV/LED lamp of at least 48W for 60 seconds / 120 seconds with UV lamp
STEP #4: THIRD LAYER
Please follow the above process one more time until you are happy with your result
STEP #5: REFINE
Wipe with Isopropyl Alcohol
Shape the nail using a Gellifique 100/180 grit nail file
Buff into shape using a Gellifique 120/180 grit buffer and concentrate on reducing the product around the cuticle area and the free edge
Remove any remaining dust with a duster brush
STEP#6: TOP COAT
Apply a Gellifique Microcrystal Top Coat, Gellifique Rubber Top Coat or Gellifique Velvet Matte Top Coat
Cure the top coat of your choice using a responsibly purchased UV/LED lamp of at least 48W for 60 seconds/120seconds with UV lamp
No need to wipe or cleanse after curing as all Gellifique top coats are tack free
GELLIFIQUE HARD BUILDER GEL - REBALANCE
STEP #1: TOP COAT & COLOUR REMOVAL
Sanitize your own and your client's hands
Using an E-file (if you are E-file trained) or a 100/180 grit file remove the Gellifique top and colour coats in order to expose the Gellifique Hard Builder Gel underneath these products
Remove any dust and wipe with Isopropyl Alcohol
STEP #2: NAIL PREP
Do not use cuticle softening products or warm water
Gently push back the cuticles and "tidy up" the area using a soft buffer or a tool which you have been trained with
Ensure that all product which has lifted has been removed using a Gellifique 120/180 grit buffer
Reduce the length of the nails if required
Ensure that the nail surface is smooth and even
Clean the nail with Isopropyl Alcohol
Apply acid-free primer or regular primer depending on the client's nail type
STEP #3: HARD BUILDER GEL APPLICATION
We recommend curing the Gellifique Hard Builder Gel on a low heat mode (99seconds) to avoid any discomfort for the client as sensitivity to heat spikes varies in people
Apply a thin layer of Gellifique Hard Builder Gel and cure with a responsibly purchased UV/LED lamp of at least 48W for 60 seconds / 120 seconds with UV lamp
Apply a medium-size bead of Gellifique Hard Builder Gel spreading it side to side and dragging away from the cuticle area. Please avoid thick build up around the free edge and the cuticle area as this will result in the product lifting later
Seal the free edge
Build and cure one nail at a time, turning the hand upside down to allow the gel to self-level and create an apex if necessary
Cure each coat of gel with a responsibly purchased UV/LED lamp of at least 48W for 60 seconds / 120 seconds with UV only
STEP #4: SHAPE
Wipe the nail with pure Isopropyl Alcohol
Refine using a Gellifique 100/180 grit file concentrating on reducing product around the cuticle area and free edge to create a smooth surface
Gently buff using a Gellifique 120/180 buffer
STEP #6: If you are going to apply gel polish colour please follow the instructions for gel polish colour application
STEP #7: TOP COAT
Apply a Gellifique Microcrystal Top Coat, Gellifique Rubber Top Coat or Gellifique Velvet Matte Top Coat
Cure the top coat of your choice using a responsibly purchased UV/LED lamp of at least 48W for 60 seconds/120seconds with UV lamp
No need to wipe or cleanse after curing as all Gellifique top coats are tack free